KMP won't save the record format for WDM

[PaulPS]

Hello. I tried many things to solve this (saved different configurations, having them dependent on WDM, edited the INI file by hand). The issue is as follows:
1. When I choose the recoed format (for example, 720x576 pix), it works OK until I reopen KMP. After IO reopen it, the format changes for 352x288).
2. Another question - Is there any way to choose the format other than in the list? (for example, I need 768x576)
2. Plus the scaling is not saved (I need the 778x664 for better view)
Thanks for the answers

[Waldemar Sikorski]

F2>Playback>General>When Starting Playback, Open to...choose specified size.

[PaulPS]

Thanks, but this is what I do. However the parameters won't save (at least the record ones). Plus "open to" misses good resolutions. I have only 720x480 which do not work good (I also have HDTV resolutions, but they do not work). More or less good resolution (720x576) exists in record mode. After I choose it, I can also choose this resolution in "open to". It means that there are too issues:
1. Record resolution is not saved.
2. There is no good resolutions in the list (for ex. 768x576)

[Waldemar Sikorski]

But you did miss the choose part.
There are many aspects that I don't understand since I have no need to make such adjustments and the knowledge required is not my education and profession. I learn as I go.
Read also this ([Only registered and activated users can see links]) from here ([Only registered and activated users can see links]).

[PaulPS]

Thanks for trying to find the solution, but it does not seem to work. This is what I mean (In Russian, sorry - it is the screen of WDM options. CTRL+M).
Where figure '1' - it is the field where the record resolution is chosen. Figure '2' is the field of the resolution which will be used to show signal from WDM.

So, when I choose the resolution to be other than the default, it works, but only for the current session of the program. After relanch the resolution needs to be set again. Plus the list of resolutions does not contain those I need.

[Waldemar Sikorski]

I should read carefully, missed the WDM part.
Your issues might not be related to KMP.
I've hooked up my receiver to check. No signal here and I've been using it independently. Look at the choices I have. I'll try to make it work on KMP sometime later.

[PaulPS]

Thanks Waldemar. I still believe it is to be solved in KMP as I do not have the same issues in other programs (but other programs lack some usefull KM features). By the way, can you possibly check whether HDTV resolutions work fine (when chosen in "format" field). As far as I understand it has nothing to do with the tv tuner. The Video card must support it and mine does. If the input signal - if less than HDTV - is simply upscaled (which is also a compromise considering my 52" LCD)

[Waldemar Sikorski]

Sorry can't make it work in ATSC.